Additional Bubble Section with Thermowell for our 4" Dash Pro SG
Available from stock!
Limited quantity stored
Estimated availability date:
|Bubble Cap Model||ProCap36|
|Sight Glass Model||3" Sight Glass with Tri-Clamp|
Additional bubble section (also known as distillation stage) with integrated thermowell for our 4 inch Dash Pro SG to be able to build a higher column with more plates.
The thermowell allows the use of a thermo couple with a diameter of 4 mm.
Please be aware that fitting with built-in thermowell can have (harmless) welding stains, which are not able to be polished in the factory at a reasonable price. This is not a product flaw.
In case a thermo couple can only be inserted very sluggish, the thermowell should be redrilled with a 4 mm drill.
More bubble sections can be added at will to reach the desired number of plates.
Please be aware, that with increasing the column height by adding additional bubble sections, the height of the down-facing arm with the product collector increases as well, which can easily be solved by offsetting the product collector by using additionally available components.
A note on the sight glasses of our Dash Pro SG bubble section:
Please be aware that although borosilicate glass is very robust, it can have asperities and air entrapment in the glass, as well as asperities by chipping at the edges due to the difficult processing. This is not a product flaw, but a characteristic caused by production. Please handle items made of borosilicate glass with utmost care, do not clamp them too tight, and do not put them down onto hard surfaces! All glasses are carefully inspected by us before delivery and singled out if deviant. We can not accept subsequent complaints.
No customer comments for the moment.